EFI Fuel Hose Seal Kit (High Pressure Side)

$9.99

Turbo Enterprises Exclusive. This kit contains all the special seals needed to remove/replace the high pressure fuel hose from the fuel pump to the fuel rail on a CX500 Turbo or CX650 Turbo.

Each kit contains:

Crush washers at injector rail (2)

Crush washer for pressure gauge test port (1)

Inboard crush washer at fuel pump (1)

Outboard special washer at fuel pump (1)

This kit rationalizes the seals originally spec’d by Honda. Some things are obviously important such the ID of the crush washers. But, the thickness is even more critical. That's the detail that maintains alignment of the fluid circuit through the banjos ...especially the inboard washers. The OD is not as important (within limits).

The outboard crush washer at the pump end is a very specialized item that seals the fuel after flow reversal in the special cap at the end of the pump.

Highest quality materials to provide a positive seal. Please refer to the official Honda Workshop Manual for additional details on assembly.